Engrana manual

Contents › Workshop

Warranty and claims

In short

Two tabs: "Warranty cases" — a customer came back with a complaint about a part or a job — and "Supplier claims" — a claim to the supplier for a defective part. Each step is a button for the next status.

Why it matters

  • Never lose a customer complaint and bring it to a resolution: replacement, repair or refund.
  • Return defective goods to the supplier or get compensation, and see where the supplier is late to reply.

Who can

Open and handle cases: service advisor, salesperson and branch manager; approve or reject warranty: the manager only. Claims are also handled by purchasing and the storekeeper; supplier returns are created by purchasing and the manager.

How to do it

  1. Open a case. "Warranty cases" → "New warranty case" → enter the order or repair order number → "Find" → choose the part (or "Labour (no part)"), describe the problem and the mileage → "Open case". The program shows whether the warranty still applies.
  2. Diagnosis. On the case card, "To diagnosis", and note what you found in the comment.
  3. Decision. The manager presses "Approve" or "Reject" (a reason is required). After approval, "Resolved": choose the resolution (replacement, repair, refund, no action). Then "Close".
  4. Supplier claim from a case. During diagnosis, "Supplier claim": choose the supplier and, if the defective part was already taken into stock with a customer return, that return. Without a return, the claim is later closed with compensation.
  5. Claim without a case. "Supplier claims" → "New claim": supplier, part, quantity and reason.
  6. Progress. "Sent" (the supplier's RMA number and reply deadline) → "Under review" → "Approved" or "Rejected". After approval, "Create supplier return" (the part leaves stock) or "Close: compensation" if the goods are not returned.

Common messages

  • "out of warranty" — the period or mileage has run out; the case can still be opened, the manager decides.
  • "answer overdue" — the supplier has not answered by the date given: remind them.
  • "Without returning the defect, the claim is closed with a note of the supplier's compensation…" — the part stays with the customer; nothing leaves stock.

Questions and answers

How does the program calculate the warranty period? For a part: from the first delivery on the order or the fitting on the repair order, for the months set on the product card ("Warranty"); if none are set, 3 years. For labour on a repair order: from the vehicle's handover, 3 months or 2,000 km from the intake mileage (without an intake mileage, only the 3 months count). Outside the period or mileage the case still opens, marked "out of warranty".

Why won't a warranty case open? For example, the part on that order has not been handed to the customer yet: "The goods of this document have not been delivered yet: there is no warranty yet."; for labour, "The vehicle has not been handed over yet: there is no labour warranty yet." With "Labour (no part)" the mileage is required: "Enter the mileage: labour warranty is 3 months or 2,000 km." "Open case" stays disabled until the order is found, the part is chosen and the problem is described.

Why is there no "Supplier claim" button? It appears only on a case in "diagnosis" and only for a part: not with "Labour (no part)". You need rights to both warranty cases and supplier claims (the service advisor, the salesperson and the branch manager). Once the supplier claim is created, the case moves to "at supplier" and the button disappears.

Does the program refund the money or replace the part when the case is "Resolved"? No. The resolution (replacement, repair, refund or no action) is only recorded in the case. The refund, replacement or repair is entered separately with the usual documents, for example a return on the customer order.

Why is there no "Create supplier return" button? It appears on an approved claim if the defect was taken into stock with a customer return, and only for the purchaser and the branch manager. If the part is still with the customer, there is "Close: compensation" instead: note how the supplier compensated the defect (credit, replacement); nothing leaves stock.

Where next

  • "Documents" — customer return and supplier return.
  • Repair order or sale card — where the part came from.