Repair order
In short
The whole repair of one vehicle on one page. At the top: the vehicle, number, intake date, mileage, status and the repair progress in eight stages (Vehicle intake → Estimate → Approval → Parts → Repair → Control → Ready → Vehicle handover; "On hold" and "Cancelled" are marked on the progress bar). Below it, "Next step": what is left to do and a single button; other actions (put on hold, cancel, vehicle deposit receipt, customer link) are under "More". Further down are the blocks "Estimate", "Parts", "Work and time", "Invoice and payment", "Intake inspection" and "Result and history": a collapsed block shows a one-line summary, a click opens it (several can be open), and the block of the current stage is open from the start. On the right (on a phone, under the header): money (per estimate, paid, left to pay), the customer and their payment terms, the customer link, the complaint at intake and the support line.
Why it matters
- Run the repair step by step: intake → diagnostics → approval → parts → work → quality check → handover.
- Get the customer's written approval of the estimate — in the program or through a link on the customer's phone.
- Ask the customer to pay by the link (Stripe): an advance on the estimate or the balance, in the "Payment by link" block. The money is recorded on the "Stripe" account against the repair order: a "Bank / card terminal" cash register with "Payment service: Stripe" (in "Companies").
- Invoice exactly the approved work and the parts actually installed.
Who can
The estimate, statuses, invoice and payment are handled by the service advisor and the branch manager. Mechanics install parts and record time. Finance sees the repair order and its result. No button means no permission: ask your administrator.
How to do it
- Intake inspection. "Inspect vehicle": damage on the diagram, photos, customer signature. The vehicle deposit receipt is printed with that diagram.
- Estimate. "Create estimate" → labour and part lines with quantity (hours) and price excl. VAT → "Save revision". Changed the estimate? "New revision" — the customer approves it again. Parts are matched to the order's car: the part search shows only those that fit it ("fits" by KType, "check" by make, model and years); with text the whole catalog shows, fitting parts first; the cross next to the car goes back to the normal search. Oil. "Find oil" → viscosity (5W-30), specification or approval (ACEA C3, VW 504 00), JASO and litres → "Find": catalog oils with availability (the "traffic light") and price; for the litres needed, the cheapest set of cans of the same oil ("Add the set"). "This car's oil" shows what and how much went in last time — "Add the same" or "Find similar". Oil by engine code. If the car has an engine code, after the oil is fitted the program offers "Save the oil for engine …" (service advisor or manager). The record is shared by every car with that engine: the oil search shows "Engine … usually takes …" and "Find by it"; to correct it, "Edit". Tyres. Part search understands a tyre size: "205/55 R16", "205 55 16 91V" finds tyres of that size by the "Tyres" characteristics or the marking in the name. "This car's tyres" above the estimate lists sizes fitted to it (repair orders) and what we keep in storage; a click adds a part line searching that size. "Tyre fitting" adds the work per wheel — fitting and balancing, valve, old tyre disposal (
NEU-MONTAJ,NEU-VALVUL,NEU-RECICLAJE, "Tyres" module); wheels: the tyres in the estimate, or 4. - Customer approval. "Customer approved" (in "Next step" or on the estimate revision): in the window choose how the decision was received ("At the counter", "By phone", "By email") and who approved; with used parts, also how the written consent was obtained (verbal consent is not enough). The customer signs the first estimate: if they approve by phone or email, send the "Customer link" or get their signature on the estimate. "Customer declined" uses the same window, with the customer's comment. Or create the "Customer link" (or show the QR code): the customer opens the estimate and approves it themselves. Earlier revisions are collapsed under "Earlier revisions".
- Parts. "Reserve from stock" sets parts aside for this repair order. Once it is "In work", the mechanic presses "Install" and the part leaves stock.
- Time. In the "Work and time" block the mechanic picks the job and records the hours.
- Invoice and payment. After the quality check — "Issue invoice", then "Take payment". The invoice is official at once, with its series number (for example, F2026-000001); it can only be corrected with a corrective invoice. Advance. Payment can be taken before the invoice. A private customer gets an "Advance invoice" at once (VAT on the payment day), and the final invoice deducts it with an "A deducir" line. A company needs none if the final invoice is in the same month; a payment from an earlier month shows in "Paid by companies, not delivered" on the "Taxes" screen and is invoiced by the 15th. If the advance invoice was not issued at once (for example, details are missing), use the "Advance invoice" button under "Invoice and payment". A payment with an advance invoice cannot be cancelled: first issue a corrective invoice for the advance invoice. If a private customer asks for a full invoice instead of a simplified one, tick "Full invoice": the customer needs a DNI/NIE on file.
A part outside the price lists. “Find manually” next to the estimate: part, supplier, purchase and price; it is added as a line of a new estimate revision (the customer approves it) and a supplier order is created for the repair order. A special-order part is marked “no return”; the text is on the printed estimate and on the customer's link page. In the estimate editor, tick or untick it on the part line.
Common messages
- "…no new work or parts are added to the repair order, only what the approved estimate covers" — the customer blocked their data (GDPR): the repair order is finished per the approved estimate; a new estimate or its approval is not possible.
- "Enter the viscosity, the ACEA / API specification, the manufacturer approval or JASO" — in the oil search fill in at least one of the fields.
- "Volume must be a number of litres above zero and no more than 60" — litres as a number, e.g. 4.5.
- "Enter the viscosity, e.g. 5W-30" — the engine oil record needs a viscosity.
- Parts are installed when the repair order is "In work" — move the repair order to work first.
- Time is recorded when the repair order is "In work" or in quality check — the same for mechanics' hours.
- "Release with debt" — the vehicle leaves without full payment: the window shows the unpaid amount; press "Take payment first" or enter the reason for releasing with debt — it goes to the log. Without a reason the button stays disabled.
- "Put the repair on hold" / "Cancel the repair order" — pick one of the suggested reasons or write a note: without a reason the button stays disabled.
- Used parts — the program asks how the customer's written consent to a used or remanufactured part was obtained.
Questions and answers
How do I cancel a repair order? "More" → "Cancel the repair order" is only there in the "New" and "Accepted" statuses, and a reason is required. Once the estimate exists (status "Awaiting approval") the order cannot be cancelled: if the customer refuses, press "Customer declined" and then "Close the repair order" (or "More" → "Close without repair"). Without a recorded refusal the program replies "An order can be closed without repair only after the customer's refusal of the estimate is recorded."; cancelling or closing releases unused part reservations, and a closed repair order no longer changes. In "Diagnostics" it can be neither cancelled nor closed: first "Create estimate" (or "New revision"), then the customer's refusal and "Close the repair order". An advance already taken is not refunded automatically on cancelling or closing: refund it separately.
Why won't the repair order move to "In work"? From "Awaiting approval" it can go to "Awaiting parts" or "In work" only after the customer has approved an estimate revision; otherwise: "No estimate revision approved by the customer." Press "Customer approved" or wait for the customer's approval through the link. From "Accepted" and "Diagnostics" there is no direct move to work: the estimate comes first. From "On hold", too, only with an approved estimate.
Why can't the vehicle be handed over? If the approved estimate is not zero, the final invoice is needed first: "Issue the invoice before handing over the vehicle." (an advance invoice does not count). Debt is checked against the "Payment terms" on the customer card: by default, "Debt …: the vehicle is released after payment…"; with "With debt, only with a reason", the program asks for the reason; with deferred payment and a limit, the customer's total debt cannot exceed the limit. The terms are changed by the branch manager and finance.
Why won't the invoice be issued? "Issue invoice" is enabled in quality check and in the "Ready" and "Delivered" statuses. For example: "No approved estimate."; "A part not in the approved estimate was installed: a new revision is needed." — make a new revision and have the customer approve it; with a zero estimate, "The approved work is free of charge: no zero-amount invoice is issued and the vehicle is handed over without one."
What do I do if the estimate has expired? A revision can be approved until its "valid until …" date: in Spain, at least 12 working days (Monday to Friday), and the program sets 12 from when the revision was made. In other countries, where the law sets no period, the program also sets 12 working days. After that the program replies "The estimate has expired. Prepare a new revision.": press "New revision" and have the customer approve it again.
How do I refund a payment taken through the link with Stripe? In "Documents" open that payment → "Cancel document" with a reason: on cancellation Stripe refunds the money to the customer's card. A branch manager or Finance / accountant can do this (refund permission); if Stripe does not accept the refund, the payment is not cancelled and the program shows Stripe's answer. The whole payment is refunded (the program asks for confirmation and shows the amount); anything already refunded in the Stripe Dashboard is not refunded twice. If Stripe later fails to refund the money, the link payment block shows it in red: refund it another way (for example, from the till). The Stripe connection must be on. If the payment has an advance invoice, first issue a corrective invoice for it. If the repair order already has its final invoice, the refund goes through only if afterwards at least the invoiced amount (with corrections) stays paid; otherwise the program replies "The repair order already has its final invoice: invoiced …, only … would remain paid after the refund": first a corrective invoice for the amount refunded (otherwise the customer would keep an invoice for money returned). A double payment (more paid than invoiced) can be refunded straight away. A part of the payment cannot be refunded this way: cancel the payment and ask the customer to pay the correct amount again.
Where next
- Customer and vehicle cards — repair history and ITV.
- "Warehouse" — stock and incoming parts on order.
- "Documents" — invoices and payments.